The Peterborough Plan
20 inches H with
lamp shade. 6 inches W at widest point.
|
Kokapelli Lamp Plan
9 inches wide by 12
inches high. Uses our 96902 lamp parts kit.
|
Northwoods Nightlight Plan
10 1/2 inches wide
by 7 1/4 inches high by 5 3/4 inches deep. Uses a 2 inch insert, white
plexiglass for front, and a nightlight cord with bulb. Wood Requirement:
night light case 5- 3/4inch thick material contrasting colors base 3/4in
x 5 3/4in x 10 1/2in bottom support block 1/4in x 3 1/8in x 7 3/4in
front and rear panel 1/4in thick material.
|
Bear Nightlight Lamp Plan
The base is 7.5
inches tall and the total lamp is 19 inches tall.
|
Pintail Duck Nightlight Plan
The base is 7.5
inches tall and the total lamp is 19 inches tall.
|
Bird Shade Plan
Two designs
alternate of this four or six-sided wooden shade. Each side is approx.
10 inches H x 14 inches W at the widest point. Wood Requirement: 1/4in
thick for 4sided shade 1/8in thick for 6 sided shade.
|
Southwest Lamp Plan
This lamp is in the
shape of a cactus with a cowboy and cattle skull overlay on the lamp
shade. It measures 24 inches H x 14 inches W x 14 inches D. Suggested
Components: Lamp Parts Kit-see right of picture. Wood Requirement: 3-
sheets 1/4in x 16in x 24in plywood for shade sides and top 1- sheet
1/8in x 16in x 24in plywood for overlays 2- boards 1/2in x 6in x 24in.
|
The Jaffrey Plan
20 inches H with
lamp shade. 10 1/4 inches W at base.
|
The Hancock Plan
20 inches H with
lamp shade. 4 7/8 inches W at base.
|
The Hudson Plan
20 inches H with
lamp shade. 4 1/4 inches W at base.
|
